EDM Wire, Supplies, and Accessories

Electrical Discharge Machining Consumables: MWI supplies the finest products available in the marketplace. We offer a full line of products to service both Sinker and Wire All available for immediate shipment.

Electrical Discharge Machining Consumables

EDM Wire

Sabre Cut SC-1

Sabre Cut SC-1 is a premium material offering the highest tensile strength in the Industry for brass.
SC-1 is a highly cleaned
non-paraffin coated providing smooth transition over guides and contact parts.

Properties

EDM Metallics

MWI offers a full compliment of metallic electrode materials and sizes. We carry a full range of brass, copper, tungsten, tungsten carbide, copper tungsten and TELCO (tellurium copper) available for immediate shipment.

PRODUCTS EDM Metallics Precision Copper Tubing
Precision Brass Tubing
Precision Copper Rods
Precision Brass Rods
Multi-Channel Tubing
Copper Centerless Drills
Silver Tungsten ST-20

Telco Electrode

Recommended Usage: Telco is a machinable copper for electrical discharge machining. As an electrode material, Telco performs the same as regular copper. However, Telco offers the distinct advantage of being 90% machinable as compared to regular copper (refer to the chart below). Telco Electrodes can be machined much faster and easier as compared to regular copper.

Specification Free Cutting Brass Hard Drawn Copper Telco
Relative Machinability Rating 100% 20% 90%
Electrical Conductivity 26% 100% 90%
Density (lbs. per cu. inch) .307 .323 .323
Approx Wear Ratio into Steel 1:01 2:01 2:01

Copper Tungsten “CT-3″

Recommended Usage: Copper Tungsten CT-3 is a sintered and infiltrated electrode material which combines the strength, high density, and high melting point of Tungsten with the excellent electrical properties and good resistance against DC arcing of copper to form an unbeatable combination.

Typical Average Properties

1) Density 14.0 gms/cc
2) Rockwell Hardness 90 B
3) Electrical Conductivity 48% I.A.C.S.
4) Copper Content 25-30%
5) Tungsten Content 70-75%
*Special Note: CT-3 thin sheets from .001 thick through .055 have a 40% Copper/60% Tungsten content

TC-9 Tungsten Carbide Tubing

TC-9 Tungsten Carbide electrodes are recommended as an alternative to brass, copper, or copper tungsten for machining holes. The extreme high density, strength, good conductivity, and high melting point of TC-9 make it an excellent choice for processing production holes where electrode wear is a factor.

Pure Tungsten Wire TU-4

Tungsten wire TU-4 is recommended for small diameter holes less than .100 deep. Due to its strength, high density, and high melting point, TU-4 electrodes are more resistant to electrode wear than any other electrode material.

EDM Accessories

MWI supplies the finest consumables available in the marketplace. We offer a full line of products to service all parts of the industry – available for immediate shipment.
Having a full stock has never been as easy as
ordering online through MWI.

EDM Sinker

EDM Sinker Supplies

DC-100

Tapping Electrodes

  • Graphite
  • Copper Impregnated Graphite

Dielectric Fluid

  • DC-100

Filters

EDM Wire Supplies

EDM Wire

EDM Wire

PRODUCTS icon_single_gear Filters
Corrosion Inhibitor
Mixed Bed Deionizing Resin

Looking to buy electrical discharge machining consumables online? – Click here!


Premium Solutions


MWI Provides Premium Electro Discharge Consumables

MWI Inc. has been providing the highest quality supplies for over 50 years. We continually innovate and develop our processes and consumables to ensure that you receive the most advanced products and solutions.

We know you need to stay ahead of the curve and maximize your productivity. That’s why MWI Inc is always developing electrical discharge machining solutions and consumables. We’ll continue to push the limits to produce the most technically advanced, precise, and reliable manufacturing products in the world.

If you’re looking to buy electrical discharge machining products online, we offer the highest quality consumables on the market. This includes an entire line to cater to both Sinker and wire needs—all available for immediate shipment.

Easy Online Ordering

Order EDM consumables online and direct from MWI!

Ensuring you have a full stock is easier than ever!

  • Wire
  • Metallics
  • Consumables and accompanying products

At MWI, we pride ourselves on offering the highest quality solutions and best value to our customers. Our engineers, management and process is held to the highest standards, because we’re serious about being the best in the business.

We stand out from the competition through our dedication to quality, hard work, excellent value, and a genuine concern for our customers. All of our efforts are put toward supporting your specific machining needs so that you can stay on top of a fast-paced and competitive market.

Competitive Advantage


Helping You Stay Ahead Of The Competition

We know that versatility is extremely important in this fast paced and competitive industry, so we want to make your job as simple as possible and keep production moving forward.

Our goal is to exceed your expectations. We understand that even a small hiccup in the cutting process can be costly, not only in material but also in time and effort. This is why we prioritize continued research and development regarding all manufacturing consumables and products.

Our innovative engineering staff utilizes advanced research and development facilities to ensure the products you receive are of the finest quality and exact precision. We pride ourselves on our capacity to meet your specific and precise requirements every time.

MWI understands how important precision is in the electronic discharge machining industry, as well as timely and streamlined supply fulfillment. Whether you’re looking for complex cuts, products for stripper plates, or general supplies, we’ll deliver the perfect solution to your exact specifications.

We also know that when working with high temperature machining, the safety of your staff and reliability of your machines and supplies are top priority. This is why our team undergoes continued professional development and training, so that they can consistently produce top-quality solutions for your specific project.

At the end of the day, you want to increase profits instead of wasting valuable time and resources due to inferior wiring or products. With a variety of top-quality carbon and graphite based solutions, we are ready to tackle your manufacturing consumables requirements while also saving you time and money.

At MWI we take the time to ensure the wire we send to you will help maintain the positional accuracy of your project. Our team consistently utilizes our research and development facilities to provide you with the highest quality consumables we know will exceed your expectations.

Your manufacturing product needs are just a click away with our online ordering system, and our fast and friendly service will help you with any specifications you need. All electrical discharge machining supplies are available for immediate shipment.

We here at MWI strive to meet the demand of a constantly growing and changing industry. And we can provide your with the best products to save you time and money.

As a partner you can trust, we take great care in providing you with the best possible service and product on the market. We hope to become a valued part of your team by providing any manufacturing consumables or services you may need.

Join our mailing list!
linkedin